DiscountVolvoParts

Volvo Engine Code Reader Tool. Made for MacTools by Launch. 

Reading trouble codes – reads DTCs of powertrain system including CAN, both pending and current DTCs.
• Clearing trouble codes – clears both pending and current DTCs.
• Readiness test – status of each monitoring system about I/M.
• Displays VIN.
• Includes OBDII generic mfg spec DTC CD and manual.

Volvos 1996-Up with OBD2 (connector can be found underdash on left side, most cars)

Volvo Engine Code Reader Tool by MaxiScan^® MS300
The MaxiScan^® MS300 code reader supports all OBD II protocols, including the newly released Controller Area Network (CAN)
protocol. Though it is small, it is able to retrieve same information as large expensive scanners!

Features
· Work with all 1996 and newer vehicles that are OBD II
　 compliant (including CAN)
· Read and clear generic and manufacturer specific
　 Diagnostic Trouble Codes (DTCs) and turn off
　 check engine light
· Support multiple trouble code requests: generic
　 codes, pending codes and manufacturer specific codes
· Review the emission readiness status of OBD monitors
· Determine the malfunction indicator lamp (MIL) status
· Retrieve VIN (Vehicle Identification No.) on 2002 and
　 newer vehicles that support Mode 9
· Easy to use with one plug-in
· Free CD software with over 7000 DTC definitions
· No batteries needed-powered via detachable
　 OBD II cable

Specifications
Display: Backlit LCD, 2-line, 8 characters
Operating Temperature: 0 to 50 C (32 to 122 F)
Storage Temperature: -20 to 70 C (-4 to 158 F)
Power: 10.0 to 15.5 Volts provided via vehicle battery
Dimensions:
　 Length 　　　　　　　Width　　　　　　　 Height
　 113 mm ( 4.4") 　　　74 mm ( 2.9") 　　　21mm (0.83")
NW: 0.25 Kg(0.45lb), GW: 0.27Kg(0.50lb)